1. Professional manufacturer,design,production injection mould and stamping mould quality control
2. rich export experience plastic injection mould and stamping mould
3. Reasonable price of design mould
4. Cavities: single or as per your requirements cavity
5. Treatment: S45C Pretreat>25Hrc,And Nitriding
6. Mould Steel: Cavity ,Core and slide: P20 ,2738,2136 available Moldbase :LKM available
7. Standard:DEM ,HUSKY,available
8. Design Software:UG,PRO-E,SOLIDWORKS,AUTOCAD
9. Hot runner: according to your demand
10. Life time: >300 Thousand Times
11 .Package: Plywood case, anti-rust paint
12.Transport: By Sea or Air
About design
Mould Information:
Mold information | content |
Product Material | ABS,PP,PC,PA,PMMA,PS,POM and etc. |
Moldbase | FUTABA,LKM,HASCO,DME you can choose |
Cavity material | 45#,50#,P20,H13, 718 2738, NAK80, S136, SKD61 etc |
Runner | Cold/Hot runner |
Cavity | Multi or single cavity |
Standart parts | Hasco |
Gate type | Side gate,Sub gate,Pin point gate,Edge gate etc |
Treatment | Heat treatment and Nitriding,polish ect. |
HRC | H45~52 |
Product weight | 50~5000 K |
Machine type | 250Ton |
The standard of appearance of the products for stripe | MT(Mold Tech),YS,HN series |
The way of Color contrast | RAL K7,PANTONE |
Part material | ABS, PP etc. | Die/tool material | 718, 738H, 2344, S136, etc. |
Cavity | Can Choose | Tool life | At least 300,000 shots |
Spare parts | FIBRO, MISUMI, PUNCH, Dayton, etc. | Die Precision | 0.02mm |
Punching press | From 6T to 800T | Main equipment | Milling, Grinding, Boring, CNC, EDM, WEDM, etc. |
Our advantage
Howe mould engineers have more than 6 years experience in design of auto moulds, precise mould, DME standard MUD molds, Hasco standard Block moulds, thin wall mould ,overmoulding mould,die casting mold and hot runner moulds. Hot runner technology, moldflow technology, gas-assistant technology are applied in our company widely, we are very familiar with well known mould standards such as HASCO,DME,MISUMI, PARKER,STAUBLI.
Howe mould useS analysis software in every step, such as moldflow, so we can suggest customers where is the best gating and air venting configuration. We are able to simulate weld line and possible deformation, It helps us to predict part outcomes strength and dimensional accuracy in advance. So we can give advice in advance. It will help us to save a lot of developing time for a new product. In addition, we are able to calculate the the injection machine parameters such as clamping force and injection pressure to help select the most appropriate injection machine for each product..
We should save you money through intelligent tooling design and efficient production runs. We have advanced CMM Machine, CNC Machine, EDM Machine, Wire-Cutting and other normal machine, the injection machine from 20 ton to 1000 Ton. We can injection almost any kind of plastics such as ABS, PC, PBT, ABS-PC, PP, PMMA, PE, nylon, etc. The steel we use for manufacturing moulds are P-20, H-13(fully hardened mould with HRC 52-54, 420 SS (Stainless Steel),ETC or as specified by the customers.
FAQ
Q:What can we do if we don’t have the mold drawing ?
A: you will only provide the actual sample to us then we can help you to make the design injection mold drawings for your confirmation
Q:Can we test the plastic injection mold?
A:after the mold is ok ,we can help you to test the mold for free.
Q:Can you process the die-casting parts of injection mold?
A: We can help to process die-casting parts for small run or mass production.
Q:What about the plastic products samples are wrong?
A: if you are not satisfied with the plastic sample, we can send the sample to you again for free.
Q:Can we test the plastic injection mold?
A:after the mold is ok ,we can help you to test the mold for free.
Q:Can you process the die-casting parts of injection mold?
A: We can help to process die-casting parts for small run or mass production.
Q:What about the plastic products samples are wrong?
A: if you are not satisfied with the plastic sample, we can send the sample to you again for free.